Maybe your pressure switch keeps chattering and you are not sure if it is the switch or the tank. Maybe you have a lab report in front of you and the numbers do not mean much yet. Or maybe you read one of our guides and still have a question about your specific setup.
That is what this page is for. Write to us with the symptom you see, the equipment you have, and what you have already checked. The more concrete you are, the more useful our reply will be.
Aquifer and Pump
Before you write
What to include so we can actually help
A good email about a well problem reads like the notes a contractor would take at the kitchen table. Tell us the symptom first: no water at all, pump short cycling, air spitting at the taps, cloudy water after a storm, a positive bacteria test.
Then add what you know about the system. Pump type if you know it, submersible or jet. Rough well depth in feet (or meters). The cut-in and cut-out pressure on your switch, often 30/50 or 40/60 psi. Tank size if the label is still readable. If you have water test results, mention which lab ran them and the parameters that came back flagged.
One thing to know: we explain and point, we do not diagnose your exact system remotely or replace a licensed contractor. If your question involves 240-volt wiring, pulling a submersible pump, or anything inside the casing, we will tell you plainly to call a licensed well contractor, and we will tell you what to ask them.
Common questions before you write
How fast will I hear back?
We read every message, but we are a small editorial operation, not a dispatch desk. If your question is urgent, meaning no water at all, a sewage smell, or a health concern like nitrate with an infant in the house, do not wait for us. Call a licensed well contractor or your local health department first, then write to us if you want help understanding what they tell you.
Can you diagnose my problem by email?
No, and you should be cautious of anyone who does. We can explain how a system works, what a symptom usually points to, and what a fair next step looks like. The actual diagnosis happens at your pressure tank, with gauges and a multimeter, by someone who can see the equipment.
Will you interpret my water test results?
Yes. Send the lab name, the parameters tested, and the results. We will explain what each number means in plain language and point you to the guidance from the EPA, CDC, USGS, Health Canada, or your state or provincial health department. We will not tell you a result is safe or unsafe beyond what those sources say.