You landed on this page probably from a footer link while looking for a troubleshooting guide. That is fine. This page explains, in plain language, what the content on Aquifer and Pump is and what it is not.
Aquifer and Pump provides practical information for private well owners in the US and Canada: pumps, pressure tanks, water testing, drilling and maintenance. Before you rely on anything here, please read the sections below.
Important: this disclaimer is a general template. It is not legal advice and has not been reviewed by a lawyer for your specific situation. If you publish or operate this site, have qualified legal counsel review and adapt it to your jurisdiction.
Information only
Informative nature of this content
Everything on this site is provided for general informational and educational purposes. It is written to help you understand how a private well system works, from the aquifer to the tap, and to help you talk to professionals with better questions.
Nothing on this site is professional advice for your specific well. It is not a substitute for an on-site inspection by a licensed well contractor, pump installer, plumber or electrician. It is also not medical, legal or financial advice.
Water quality guidance on this site references public sources such as the EPA, CDC, USGS, Health Canada and state or provincial health departments. Where those bodies publish limits or testing recommendations, we point you to them. We do not set our own limits, and your local rules may be stricter than what a general article describes.
Well systems vary. Depth, geology, water chemistry, local codes and the age of your equipment all change what is safe and sensible. Two homes with the same symptom can have different causes. When in doubt, stop and call a licensed professional.
Your well, your call
No guarantee of completeness or accuracy
We work to keep the guides accurate and current, but we make no warranty, express or implied, that the content is complete, correct, up to date or suitable for your situation. Codes change, product specifications change and regional practice differs across the US and Canada.
Any numbers we give, such as typical pressure switch settings of 30/50 or 40/60 psi, pre-charge set 2 psi (about 0.14 bar) below cut-in, or flow measured in gallons per minute, are common reference points. Your system may be configured differently. Always check your own equipment labels and documentation first.
Cost figures are honest ranges, not quotes. Depth, access, distance to the job and regional labor rates move the real price. The only reliable number is a written estimate from a contractor who has seen your site.
Use of any information on this site is at your own risk. If a step involves 240-volt wiring, pulling a submersible pump, working inside the casing or handling chemicals, treat the written guide as background only and hire a licensed professional.
Limits of responsibility
Limitation of liability
To the fullest extent permitted by applicable law, Aquifer and Pump, its owners, contributors and partners accept no liability for any loss, damage, injury or expense arising from the use of, or reliance on, the content of this site.
This includes, without limitation, direct and indirect damages such as property damage from attempted repairs, incorrect diagnosis of a well problem, water damage, electrical injury, or decisions made about drinking water based on general information.
Some tasks described on this site are not DIY. Working with 240-volt circuits, lifting a submersible pump from the well, entering or modifying the well casing, and shock chlorination all carry real risk of injury, contamination or equipment damage. Where we say a job is for a licensed contractor, that is the limit of what the guide is for.
If any part of this limitation of liability is not enforceable in your jurisdiction, the remaining parts continue to apply to the maximum extent the law allows.
External sites
Links to third parties
This site links to third-party websites, including public agencies such as the EPA, CDC, USGS, Health Canada and state or provincial health departments, as well as laboratories, manufacturers and other resources.
We do not control these sites and are not responsible for their content, accuracy, availability or privacy practices. A link is provided because the source is relevant to the topic, not as an endorsement of everything that organization publishes or sells.
When you follow a link, you leave this site and the terms and privacy policies of the destination site apply. If a linked page moves or disappears, that is outside our control, though we try to keep references current.
Our content
Intellectual property
Unless stated otherwise, all text, structure and design on Aquifer and Pump are the intellectual property of the site operator and are protected by applicable copyright and other intellectual property laws.
You may read, print and share individual pages for personal, non-commercial use, provided you do not alter the content and you credit the source. You may not copy, republish, scrape, translate for republication or commercially exploit the content of this site, in whole or in part, without prior written permission.
Third-party names, product names, trademarks and logos mentioned on this site belong to their respective owners. References to them are for identification and explanation only and do not imply affiliation or endorsement.
A note on this text
Template status and legal review
This disclaimer is a general template written for informational purposes. It does not constitute legal advice, and no lawyer-client relationship is created by reading or using it.
Laws that govern websites, consumer information and liability differ between the United States and Canada and between individual states and provinces. The operator of this site should have this document reviewed and adapted by a qualified lawyer in the relevant jurisdiction before relying on it.
If you have questions about this disclaimer or about the site, contact the operator using the details provided on the contact page.